How to Connect the Water Chiller & Air Pump to ChinaCNCzone Desktop CO2 Laser Engraving Machine
ChinaCNCzone
2017-03-16 14:22:55
How to Connect the Water Chiller and the Air Pump with ChinaCNCzone Desktop CO2 Laser Engraving Cutting Machine?
![Water Chiller connect with co2 laser cutter](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/11/20170316141656582.jpg.webp)
![Water Chiller connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/b2/20170316141953778.jpg.webp)
![water chiller connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/bc/20170316142148878.jpg.webp)
![water chiller connect with co2 laser engraver](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/73/20170316142244183.jpg.webp)
![CO2 Laser engraver machine air pump connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/af/20170316142554155.jpg.webp)
![co2 laser engraver air pump connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/20/20170316142646941.jpg.webp)
About the Water Chiller and CO2 laser engraving machine connection:
1. Plug the silver ALARM OUTLET device into ALARM OUTLET port,
![Water Chiller connect with co2 laser cutter](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/11/20170316141656582.jpg.webp)
2. Water tube connection
![Water Chiller connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/b2/20170316141953778.jpg.webp)
Connect WATERIN tube with OUTLET port in CW3000 chiller, as below picture.
![water chiller connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/bc/20170316142148878.jpg.webp)
Connect WATEROUT tube with INLET port in CW3000 chiller, as below picture
![water chiller connect with co2 laser engraver](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/73/20170316142244183.jpg.webp)
About Air Pump connection
1. Connect AIR IN tube with air pump
2. Plug power cable into the socket in machine, as below picture show.
2. Plug power cable into the socket in machine, as below picture show.
![CO2 Laser engraver machine air pump connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/af/20170316142554155.jpg.webp)
3. Plug in the CW 3000 power supply cable,
Now, the CW3000 chiller and air pump has connected already, as below picture.
Now, the CW3000 chiller and air pump has connected already, as below picture.
![co2 laser engraver air pump connection](https://cdn.cloudbf.com/thumb/format/mini_xsize/upfile/118/images/20/20170316142646941.jpg.webp)