Metal Cnc Router 3axis 2200w Machine For Bronze Mirror With Linear Guide
Step 1. Preparation
(1) Belowis our jade Material before engraving:
(2) Beloware our engraving bits:
(3) Belowis the stone machine used in our engraving process:
Step 2. Process：
These are our experimentalprocedures, which mainly include two aspects: rough engraving, halfrough engraving and acurracy engraving
（1）Rough Engraving
Table 1 .Rough EngravingParameter Table
|
Project |
Value |
|
Carving Tool |
6mm flat bottom engraving bits |
|
Spindle Speed |
12000RPM |
|
Feed Speed |
1200mm/min |
|
Feed Depth |
0.3mm |
|
Precision |
0.03mm |
|
Processing Time |
60mins(1h) |
（2）Half Rough Engraving
Table 2 .Half Rough EngravingParameter Table
|
Project |
Value |
|
Carving Tool |
R2 ball mill |
|
Spindle Speed |
12000RPM |
|
Feed Speed |
4000mm/min |
|
Feed Depth |
0.2mm |
|
Precision |
0.03mm |
|
Processing Time |
90mins(1.5h) |
（3）Acurracy Engraving
When the rough engraving andhalf rough engraving are completed, let's finish the acurracy engraving.
Table 3. Acurracy EngravingParameter Table
|
Project |
Value |
|
Carving Tool |
R1 ball mill |
|
Spindle Speed |
20000RPM |
|
Feed Speed |
2500mm/min |
|
Feed Depth |
0.05mm |
|
Precision |
0.03mm |
|
Processing Time |
180mins(3h) |
Step 3. Product comparison before andafter engraving
Below,the left picture is thebronze mirror material before engraving, The right picture is the bronze mirrorafter engraving.
Chinacnczone wish youall the best.