Steel Structure 3040 5 Axis 3D Metal Engraving Machine For Carbon Fiber Watch Case

Step 1. Preparation

(1) Below is our carbon fiber material before engraving:

(2) Below are our engraving bits:

(3) Below is the steel structure 3040 5 axis 3d metal engraving machine used in our engraving process:

Step 2. Process：

These are our experimental procedures, which mainly include four aspects: rough engraving by 4mm flat bottom engraving bits .Acurracy Engraving By 4mm flat bottom engraving bits, Acurracy Engraving By 2.5mm flat bottom engraving bits， Acurracy Engraving By 1mm flat bottom engraving bits and 4mm flat bottom engraving bits

（1）Rough Engraving

Table 1 .Rough Engraving Parameter Table

（2）Acurracy Engraving By 4mm flat bottom engraving bits

This is the first step of Acurracy Engraving, which is mainly to polish Carbon Fiber Watch Case.

Table 2 .Half Rough Engraving 4mm flat bottom engraving bits

（3）Acurracy Engraving By 2.5 mm flat bottom engraving bitsThis is the second step of Acurracy Engraving,

Table 3 .Half Rough Engraving 2.5 mm flat bottom engraving bits Parameter Table

（4）Acurracy Engraving By 1mm flat bottom engraving bits

This is the third step of Acurracy Engraving, which is for the position that was not processed before.

Table 3. Acurracy Engraving By 1mm flat bottom engraving bits Parameter Table

（5）Acurracy Engraving By 4mm flat bottom engraving bits

This is the final Acurracy Engraving, the precise production of Carbon Fiber Watch Case is completed through this step

Table 4. Acurracy Engraving By 4mm flat bottom engraving bits Parameter Table

Step 3. Product comparison before and after engraving

Below,the left picture is the Carbon Fiber Watch Case before engraving, The right picture are the 3D picture file and Carbon Fiber Watch Case after engraving

Chinacnczone wish you all the best.